Please note: the results below are estimates based on current (limited) understanding of the impact process and come with large uncertainties; they should be used with caution, particularly in the case of peculiar input parameters. All values are given to three significant figures but this does not reflect the precision of the estimate. For more information about the uncertainty associated with our calculations and a full discussion of this program, please refer to this article
-
Your Inputs:
- Distance from Impact: 500.00 km ( = 311.00 miles )
- Projectile diameter: 300.00 meters ( = 984.00 feet )
- Projectile Density: 3000 kg/m3
- Impact Velocity: 11.00 km per second ( = 6.83 miles per second )
- Impact Angle: 45 degrees
- Target Density: 1000 kg/m3
- Target Type: Liquid water of depth 2.0 km ( = 1.2 miles ), over crystalline rock.
-
Energy:
- Energy before atmospheric entry: 2.57 x 1018 Joules = 6.13 x 102 MegaTons TNT
- The average interval between impacts of this size somewhere on Earth during the last 4 billion years is 7.7 x 104years
-
Major Global Changes:
- The Earth is not strongly disturbed by the impact and loses negligible mass.
- The impact does not make a noticeable change in the tilt of Earth's axis (< 5 hundreths of a degree).
- The impact does not shift the Earth's orbit noticeably.
-
Atmospheric Entry:
- The projectile begins to breakup at an altitude of 47100 meters = 154000 ft
- The projectile reaches the ground in a broken condition. The mass of projectile strikes the surface at velocity 10.5 km/s = 6.5 miles/s
- The energy lost in the atmosphere is 2.43 x 1017 Joules = 5.81 x 101 MegaTons.
- The impact energy is 2.32 x 1018 Joules = 5.55 x 102MegaTons.
- The larger of these two energies is used to estimate the airblast damage.
- The broken projectile fragments strike the ground in an ellipse of dimension 0.89 km by 0.63 km
-
Crater Dimensions:
- What does this mean?
- The crater opened in the water has a diameter of 5.33 km ( = 3.31 miles ).
- For the crater formed in the seafloor:
- The result of the impact is a crater field, not a single crater. The following dimensions are for the crater produced by the largest fragment.
- Transient Crater Diameter:
264 meters ( = 866 feet )
- Transient Crater Depth: 93.4 meters ( = 306 feet )
- Final Crater Diameter:
330 meters ( = 1080 feet )
- Final Crater Depth: 70.3 meters ( = 231 feet )
- The crater formed is a simple crater
- The floor of the crater is underlain by a lens of broken rock debris (breccia) with a maximum thickness of 32.6 meters ( = 107 feet ).
- At this impact velocity ( < 12 km/s), little shock melting of the target occurs.
-
Thermal Radiation:
- What does this mean?
- At this impact velocity ( < 15 km/s), little vaporization occurs; no fireball is created, therefore, there is no thermal radiation damage.
-
Seismic Effects:
- What does this mean?
The major seismic shaking will arrive approximately 1.67 minutes after impact.- Richter Scale Magnitude: 4.0
- Mercalli Scale Intensity at a distance of 500 km:
Nothing would be felt. However, seismic equipment may still detect the shaking.
-
Ejecta:
- What does this mean?
- Almost no solid ejecta reaches this site.
-
Air Blast:
- What does this mean?
The air blast will arrive approximately 25.3 minutes after impact.- Peak Overpressure: 945 Pa = 0.00945 bars = 0.134 psi
- Max wind velocity: 2.22 m/s = 4.96 mph
- Sound Intensity: 60 dB (Loud as heavy traffic)
- Damage Description:
Glass windows may shatter.
-
Tsunami Wave:
- What does this mean?
- The impact-generated tsunami wave arrives approximately 1.2 hours after impact.
- Tsunami wave amplitude is less than 4.0 meters ( = 13.0 feet).
Tell me more...
Click here for a pdf document that details the observations, assumptions, and equations upon which this program is based. It
describes our approach to quantifying the important impact processes that might affect the people, buildings, and landscape in the
vicinity of an impact event and discusses the uncertainty in our predictions. The processes included are: atmospheric entry, impact
crater formation, fireball expansion and thermal radiation, ejecta deposition, seismic shaking, and the propagation of the atmospheric
blast wave.
Recent improvements in the airblast calculation are described here.
Earth Impact Effects Program Copyright 2004, Robert Marcus, H.J. Melosh, and G.S. Collins
These results come with ABSOLUTELY NO WARRANTY