Earth Impact Effects Program

Robert Marcus, H. Jay Melosh, and Gareth Collins

Please note: the results below are estimates based on current (limited) understanding of the impact process and come with large uncertainties; they should be used with caution, particularly in the case of peculiar input parameters. All values are given to three significant figures but this does not reflect the precision of the estimate. For more information about the uncertainty associated with our calculations and a full discussion of this program, please refer to this article

Your Inputs:

Distance from Impact: 300.00 km ( = 186.00 miles )
Projectile diameter: 4.00 km ( = 2.48 miles )
Projectile Density: 1000 kg/m3
Impact Velocity: 20.00 km per second ( = 12.40 miles per second )
Impact Angle: 45 degrees
Target Density: 2500 kg/m3
Target Type: Sedimentary Rock

Energy:

Energy before atmospheric entry: 6.70 x 1021 Joules = 1.60 x 106 MegaTons TNT
The average interval between impacts of this size somewhere on Earth during the last 4 billion years is 6.6 x 106years

Major Global Changes:

The Earth is not strongly disturbed by the impact and loses negligible mass.
The impact does not make a noticeable change in the tilt of Earth's axis (< 5 hundreths of a degree).
The impact does not shift the Earth's orbit noticeably.

Crater Dimensions:

What does this mean?


Transient Crater Diameter: 23.2 km ( = 14.4 miles )
Transient Crater Depth: 8.2 km ( = 5.09 miles )

Final Crater Diameter: 35.1 km ( = 21.8 miles )
Final Crater Depth: 864 meters ( = 2830 feet )
The crater formed is a complex crater.
The volume of the target melted or vaporized is 41.8 km3 = 10 miles3
Roughly half the melt remains in the crater, where its average thickness is 99 meters ( = 325 feet ).

Thermal Radiation:

What does this mean?


Time for maximum radiation: 1.89 seconds after impact

Visible fireball radius: 30.5 km ( = 19 miles )
The fireball appears 23.1 times larger than the sun
Thermal Exposure: 2.69 x 107 Joules/m2
Duration of Irradiation: 8.14 minutes
Radiant flux (relative to the sun): 55

Effects of Thermal Radiation:

Seismic Effects:

What does this mean?


The major seismic shaking will arrive approximately 60 seconds after impact.
Richter Scale Magnitude: 8.8
Mercalli Scale Intensity at a distance of 300 km:


Ejecta:

What does this mean?


The ejecta will arrive approximately 4.24 minutes after the impact.
At your position there is a fine dusting of ejecta with occasional larger fragments
Average Ejecta Thickness: 9.56 cm ( = 3.76 inches )
Mean Fragment Diameter: 1.25 cm ( = 0.493 inches )

Air Blast:

What does this mean?


The air blast will arrive approximately 15.2 minutes after impact.
Peak Overpressure: 95300 Pa = 0.953 bars = 13.5 psi
Max wind velocity: 167 m/s = 373 mph
Sound Intensity: 100 dB (May cause ear pain)
Damage Description:


Tell me more...

Click here for a pdf document that details the observations, assumptions, and equations upon which this program is based. It describes our approach to quantifying the important impact processes that might affect the people, buildings, and landscape in the vicinity of an impact event and discusses the uncertainty in our predictions. The processes included are: atmospheric entry, impact crater formation, fireball expansion and thermal radiation, ejecta deposition, seismic shaking, and the propagation of the atmospheric blast wave.






Earth Impact Effects Program Copyright 2004, Robert Marcus, H.J. Melosh, and G.S. Collins
These results come with ABSOLUTELY NO WARRANTY